Program 12 to 15
Xen Topaz Programming Manual 86
PROGRAM 15: EXTENSION BASIC SETUP
15-01: B
ASIC EXTENSION DATA SETUP
Description
Use Program 15-01 : Basic Extension Data Setup to define the basic settings for each extension.
Input Data
Conditions
None
Feature Cross Reference
♦ Refer to feature in above chart.
IN
SA
SB COPY
Extension Number Max 4 digits
Prog. No. Item Input data Default
Related Program
15-01-01
Extension Name
Set the extension/virtual exten-
sion name
Up to 12 Characters
200:
EXT200
:
295:
EXT295
15-01-02
Outgoing Trunk Line Prefer-
ence
Use this option to set the exten-
sion’s outgoing Trunk Line Pref-
erence. If enabled, the exten-
sion user get trunk dial tone
when they lift the handset.
The user hears trunk dial tone
only if allowed by Trunk Access
Map programming (Programs
14-07 and
15-06). Refer to the Line Prefer-
ence feature for more details.
0 : Off
1 : On
0
14-06
21-02
15-01-03
SMDR Printout
Use this option to include or
exclude the extension you are
programming in the SMDR re-
port.
0: Do not print on
SMDR report
1: Include on SMDR
report
1
15-01-04
Calling Party Number notifi-
cation (ISDN Trunk)
0 : Disable
1 : Enable
1
15-01-05
The terminal for restricting
Outgoing calls is Disabled -
On Incoming Line. Toll Re-
striction invoked on incoming
trunk call. Supervise dial detec-
tion = Enable Trunk Route
0 : Enable
1 : Disable
０
21-01-15
21-01-16
21-01-17
To Next Page
Loading...
