— 1-5 —
1.1.3. Interchangeability of Motor and Driver Unit
Interchangeable types
The standard Motors and the EDC Driver Units can be randomly matched (interchangeable).
You may have a combination of a Motor and a Driver Unit that have the different serial number.
However, please refer to “2.4. Standard Combination List” for combination of reference
numbers of the Motors, the Driver Units and the Cable Sets.
Non-interchangeable types
The interchangeability of the Motors and the Driver Units won’t be applicable for a Megatorque
Motor System that is made to a special order. In such a case please refer to respective
specification documents.
Be sure to make a combination of a Motor and a Driver Unit with the same serial number when
they are not interchangeable. Moreover, you must use the specified Cable Set.
Please be aware that the Megatorque Motor System won’t fully exhibit its performance as
described in its specifications if a Motor and a Driver Unit are matched with different serial
number, or if you change the length of the Cable Set. Especially in case of a System that
incorporates an absolute position sensor, you may lose positioning repeatability of the Home
position.
To Next Page
Loading...
Need help?
General
