— 9-6 —
9.2. Glossary of Command and Parameter
The password must be entered before input of a command that is marked with “Ì”.
◊ No entry of the password is necessary for setting to a program.
Depending on its option code, a command marked with “(Ì)” requires entering the password.
A command marked with “(ÌÌ)” is for factory use only. The user is not allowed to input the
command.
A command that is marked with “P” indicates that you can also input the command to an
internal program.
A command that is marked with “P ex.” is exclusive for internal program use.
“Shipping set” denotes a value that is set in the factory before shipment.
Conditions to be met denotes that required conditions for execution of the command.
◊ If the all conditions are not met, error of “
COND. MISMATCH?” occurs.
To Next Page
Loading...
Need help?
General
