NSK Megatorque PS Series User Manual

— 11-2 —
11.1.2. Confirmation of Alarm and Warning
 The monitor TA reports the current status of alarm and warning.
(1) Input the monitor TA.
:
T
A
F3>Hardware Over
Travel;_
A
ENT
T
The System reads out the current status of alarm and warning. There is no indication
when no alarm or warning is reported.
(2) Every input of the SP
key scrolls down to the next readout.
Keep pressing the SP
key to monitor all alarms or press the BS key to quit
monitoring.
SP
…
SP
:
T
A
F3>Hardware Over
Travel;
F
4>Emergency Stop;
The indicator shows that the alarm F3 (Hardware over travel) and the alarm F4
(Emergency stop) are occurring.
Ä
The monitoring order of alarms does not correspond to the order of occurrence.

NSK Megatorque PS Series Specifications

General

Brand	NSK
Model	Megatorque PS Series
Category	Engine
Language	English