Tungsten™ E2 Handheld 139
CHAPTER 7 Managing Your Calendar
4 Set the repeat interval:
a. Select Day, Week, Month, or Year as the repeat unit.
b. Select the Every line and enter the frequency at which the event repeats.
c. Select the End on pick list and select an end date, if needed.
d. If you selected Week in step c, select the day of the week the event repeats. If
you selected Month in step c, select Day to select the week within the month,
such as the 4th Thursday, or select Date to select the same date within the
month, such as the 15th.
e. Select OK.
Done
Tip
To enter holidays such as
Labor Day or
Thanksgiving, select
Month, enter 12 on the
Every line, and then
select Day as the Repeat
By setting.
To Next Page
Loading...
