Tungsten™ E2 Handheld 128
CHAPTER 6 Managing Your Contacts
Using Tap-to-Connect
With Tap-to-Connect, you can select a contact and dial a phone number or address an email or text
message by selecting the appropriate entry on the contact screen. By default, Tap-to-Connect is
not enabled.
0
1 Press the Contacts button.
2 Enable Tap-to-Connect:
a. From the Contacts list, open the menus
.
b. Select Options, and then select Preferences.
c. Select Enable Tap-to-Connect, and then select OK.
Continued
Before You Begin
You must have a
compatible mobile phone
(sold separately) that
includes Bluetooth
wireless technology, and
you must complete all the
prerequisites for the
email and messaging
applications.
To use Tap-to-Connect
with your handheld’s
built-in Bluetooth
wireless technology, you
must set up a phone
connection. To use it with
your handheld’s IR port,
run Phone Link Updater
and then use the Phone
Link application to set up
a phone connection.
To Next Page
Loading...
