Tungsten™ E2 Handheld 266
CHAPTER 14 Making Bluetooth Wireless Connections
Setting advanced Bluetooth features
These advanced settings are used in special circumstances.
Storing recently found device names
When you enable or disable the device name cache you control whether or not your handheld
retrieves the names of remote devices each time the discovery process takes place. By default, the
device name cache is enabled, which means the names of devices that are found are stored in
cache. The next time the device is discovered, the name appears very quickly.
0
1 Go to Favorites and select Bluetooth .
2 Open the menus.
3 Select Options, and then select Disable device name cache.
The selection on the Options menu toggles to Enable device name cache. This
indicates that the cache is disabled.
Done
Tip
If the remote device name
has changed, disabling
and then enabling the
device name cache forces
your handheld to retrieve
the new device name.
To Next Page
Loading...
