Philips Expression MR400 - Page 107

ExpressionMR400InstructionsforUseGettingStarted3‐21
PresstheSetupkeyandthentheMonitor
key.OntheMonitorSetupmenu,select
SoundAdjust.
Thefollowingmenuitemsareavailable:
• Alarmscontrolsthealarmsound(identicaltoandinteractivewithAlarmSoundinthe
Alarmsmenu):
– Off
turnsoffthealarmsound,asindicatedbythealarmaudiooffsymbol(seepage4‐
4).(Onlythealarmsoundwillbedisabled;visualalarmindicationswillcontinue.)
– Onturnsonthealarmsound,asindicatedbythealarmaudioarmedsymbol(see
page4‐4).(Default)
• HRTone
Sourcesetsthesourceusedfortheheartratetone(identicaltoandinteractive
withsameoptionintheECGmenuandSPO2menu):
– Offremovestheheartbeatdetectedsymbolfromthedisplayandsoundsnopulse
tone.(Default)
– QRSprovidestheheartbeatdetectedsymbolandatonetriggeredby
theQRS
detectionfromtheECGvitalsign.
– SPO2

providestheheartbeatdetectedsymbolandatonemodulatedbytheSPO2
vitalsign,wherethelowertheSPO2value,thelowerthepitch.
• AlarmVolumesetsthealarmsoundlevelfrom1–10.(Default=4)
• PulseVolumesetsthepulsesoundlevelfrom1–10.(Default=4)
• ClickTone
controlsanaudioindication thatisproducedwhenanactiveareaofthetouch
screeniscontacted:
– Offdoesnotproduceaclicktone.
– Onproducesaclicktone.(Default)
• ClickVolumesetstheclicktonesoundlevelfrom1–10.(Default=4)
1Alarms
2 HR Tone Source
3 Alarm Volume
4Pulse Volume
5 Click Tone
6
Click Volume
1
2
3
4
5
6