Philips Expression MR400 - Acquisition and Control; Synchronization

ExpressionMR400Instructionsfor UseSystemOverview2‐3
Acquisition and Control
UseoftheMR400isrestrictedtoonepatientatatime.TheMR400displayspatient
measurementsacquiredduringmonitoring.Controlsandsettingsforpatientmonitoringare
providedlocallyonthetouchscreenorremotely(forexample,intheMRIcontrolroom)when
equippedwiththeIP5,whereconnectionsforthe
printerandthehospitalnetworkarealso
available.
Synchronization
TheMR400willautomaticallyestablishcommunicationwiththewirelessmodules,and IP5(if
equipped).However,duetotheusemodel,thedevicescanestablishcommunicationand
synchronizepower‐onsettingsaccordingtothestart‐upsequence:
•IftheMR400bootsandcommunicatesfirst,thenitssettingswillbereflectedatthe
IP5.
•IfanIP5bootsandcommunicatesfirst,thenitssettingswillbereflectedattheMR400.
IfusinganIP5,patientidentifiableinformation(nameandIDnumber)willbeavailableafter
synchronizationoccurs.
MR400
IP5
Hospital network
HIS system
MRI magnet room
MRI control room
Patient
table
MR400 to IP5 (wireless)
Modules to MR400
(wireless)
USB
Ethernet
Printer
Gating cable