Philips Expression MR400 - Restoring Alarm Limit Defaults

4‐16AlarmsExpressionMR400InstructionsforUse
Restoring Alarm Limit Defaults
WheneverthePatientTypesettingischanged(seepage3‐11),theMR400automaticallyrestores
thedefaultvaluestoallthealarmlimitsettings;seepage4‐24foralistingofthedefaultvalues.
Toimmediatelyrestorethealarmlimitstothedefaultsettings
4Usetheincrementorthedecrement
buttontoadjustthesetting.
Or,directlyinputthevalueusingthekeypad,theplus/minus
buttonand/orthedecimalpo intbuttonthenpresstheEnter
button.(Foritemlocations,seeAlarmLimitControlsonpage4‐9.)
Thecurrentadjustmentwillreflectthesetting.(Inthisex ample,the
lower
limitsettingwasadjustedfrom36to33.)
5Tochangetheremainingsetting,repeatsteps3and4.
6Tochangeanyremainingparameters,repeatsteps2,3,and4.
7PresstheMainScreenkeytoclosethe menu.
Newlimitsettingswi llbeindicatedintheparameter’sVSbox.
Step Action
Adjusted lower limit
Lower alarm limit setting
Step Action
1PresstheSetupkeyandthentheAlarmskey.
TheAlarmsmenuappears.Currentsettingsaredisplayed.
2 SelectDefaultLimits.
Thealarmlimitsettingsarereturnedtothedefaultvalues.