Philips Expression MR400 - Size

ExpressionMR400InstructionsforUse MonitoringInvasiveBloodPressure8‐25
• CVP(centralvenouspressure )displayedinblue.
• LAP(leftatrialpres sure)displayedinpurple.
• ICP(intracranialpressure)displayedinlightblue.
ToassignalabeltoanP1(orP2)channel
Size
ChangestheP1(orP2)waveformamplitude,allowinglowlevelsignalstobescaleduporhigh
levelsignalstobescaleddownforbetterviewing.
Thefollowingoptionsareavailable:
•40mmHg
•75mmHg
•100mmHg
•150mmHg(Default)
•200mmHg
•250mmHg
TochangetheamplitudeoftheP1(orP2)waveform
See
ChangingtheP1(orP2)WaveformAmplitudeonpage8‐19.
Step Action
1 SelecttheP1(orP2)VSbox.
TheP1menu(ortheP2menu)appears.Currentsettingsare
displayed.
2 SelectSetLabel.
TheSetLabelmenuappears.Thecurrent settingishighlighted.
3 Selectthedesiredlabel:
None
ABP
PAP
CVP
LAP
ICP
The
labelischanged.TheannotationintheVSboxanditscoloris
updated.