Philips Expression MR400 - Changing the Heart Rate Alarm Limits

5‐24MonitoringECGExpressionMR400InstructionsforUse
* The displayed waveform should at least be equal to the size of this indicator, as signals with lower amplitudes may be prone to
gradient interference; see Checking the ECG Signal Strength on page 5-16 for details.
Changing the Heart Rate Alarm Limits
TheHeartRateAlarmLimitsmenucanbeaccessedbytouchingthealarmlimitsettingsintheECG
VSbox.
12 ECG VS waveform Is the ECG waveform (Trace B, when enabled)
Note
To change the waveform speed, see Sweep Speed on page 3-25.
13 Scale indicator Represents a 1 millivolt signal amplitude for the selected scale of Trace B*
14 Lead type Is the selected ECG lead for Trace B
15 Lead type Is the selected ECG lead for Trace A
16 Scale indicator Represents a 1 millivolt signal amplitude for the selected scale of Trace A*
Item Name Definition
1 Alarm limit settings, ECG VS box
2Extreme Tachycardia button
3High button
4Low button
5 Extreme Bradycardia button
6 HR Alarm Limits menu label
1
2
3
4
5
6
7
8 9
10
11 12 13 14 15
16