Philips Expression MR400 - Source

ExpressionMR400InstructionsforUse MonitoringRESP10‐7
Source
SelectsthesourceusedtoacquiretherespirationratemeasurementsdisplayedtheRESPVSbox.
Thefollowingoptionsareavailable:
• CO2calculatestheratebymeasuringthetimeintervalbetweendetectedbreaths.
(Default,whenequippedwiththeCO2orAGENToption)
•BELcalculatestherateusingapneumaticbellowsthatmeasureschest
orabdominal
movement.Nowavef ormisprovided.(Ifequippedwith theCO2orAGENToption,thenthe
CO2respirationrateelementswillappearintheCO2VSbox.)
Tocontrolthesourceusedforrespiration
2TouchthemenuitemtoselectoneofthefollowingRESPoptions:
Source
Apnea
ApneaTime
Themenu
itemappears.Thecurrentsettingishighlighted.
3 Selectthedesiredsettingfromthemenuoptions(exceptApnea,
whichisselectableontheRESPmenu).
Thesettingisentered.
4Tochangeothersettings,repeatsteps2and3.
Step Action
1 SelecttheRESPVSbox.
TheRESPmenuappears.Currentsettingsaredisplayed.
2 SelectSource.
TheSourcemenuappears.Thecurrentsettingishighlighted.
3 Selectthedesiredsettingfortherespirationratesource:
CO2
BEL
Thesettingischanged.
Step Action