Philips Expression MR400 - AGENT (Optional)

To Next Page

To Previous Page

ExpressionMR400InstructionsforUse SpecificationsA‐15

Transducer Adapter Cable Compatibility

InvasivepressureinputmateswithanAmphenolconnector(MS‐3106A14S‐6P).Withthisconnectorandthe

following connectioninformation,transduceradaptercabl esmaybefabricatedororderedfromvarious

manufacturers.

ConnectorPinNumber SignalName

A ‐Signal

B+Excitation

C+Signal

D ‐Excitation

EShield

AGENT (Optional)

SideStream,non‐dispersiveinfrared(NDIR)absorptiontechnique,includingwatertrapfiltrationsystemand

microprocessorlogiccontrolofsamplehandlingandcalibration

Simultaneouslymeasuredgases Anytwoofthefollowing,inspiredorexpired,whilealsomeasuring

CO2,N2O,and O2:

Halothane

Isoflurane

Sevoflurane

Desflurane

Enflurane

MeasurementRange(aftermaximumwarm‐

upperiod)

Halothane:0to5.0

Vol.%

Isoflurane:0to5.0Vol.%

Sevoflurane:0to8.0Vol.%

Desflurane:0to18.0Vol.%

Enflurane:0to5.0Vol.%

CarbonDioxide:0to10.0Vol.%

NitrousOxide:0to100Vol.%

Invasive Blood Pressure (Optional)

Related product manuals