Philips Expression MR400 - Status Information Pane

2‐16SystemOverviewExpressionMR400InstructionsforUse
Status Information Pane
Thestatusinformation paneprovidesindicationsfortheMR400andwirelessdevices:
• Communicationandpowerindicationswillbedisplayed within2seconds.
6 Suspend key places the MR400 in suspend mode
7 Audio Pause key temporarily deactivates alarms
8Alarm key acknowledges an active alarm
91-Touch Alarms key sets all alarm limits according to preset calculation
values
10 NIBP Interval key accesses the automatic measurement Interval options
11 Clear Trends key clears stored trend data
12 Zero All key zeros all active invasive blood pressure channels
13 Setup key accesses the Monitor Setup, Printer, and Alarms menus
1 Monitor network icon, which indicates the selected wireless
network channel (1, in this example) and, when pressed, allows you
to select the channel used by the MR400; see Setting the Wireless
Network Channel of the Cart on page 1-27 for details.
2 Indicates the battery time-remaining (given in an hours:minutes
format) until power will be exhausted for the wSPO2 module; also,
indicates that the wSPO2 module’s communication with the
MR400 is good.
1
2
3
4
5