Philips Expression MR400 - Set Time & Date

3‐22 GettingStartedExpressionMR400Instructions forUse
Tocontrolthesounds
Set Time & Date
Setsthetimeanddate,andthedisplayedtimeanddateformats;seepage2‐14.
ToopentheSetTime&Datemenu
Step Action
1PresstheSetupkeyandthentheMonitorkey.
TheMonitorSetupmenuappears.Currentsettingsaredisplayed.
2OntheMonitorSetupmenu,selectSoundAdjust.
TheSound
Adjustmenuappears.Currentsettingsaredisplayed.
3 Selectthemenuitemforthesoundfunctionthatyouwantto
control:
Alarms
HRToneSource
AlarmVolume
PulseVolume
ClickTone
ClickVolume
Themenuitemappears.Thecurrentsettingishighlighted.
4 Selectthedesiredsettingfromthemenuoptions(exceptAlarms
andClickTone
,whichareselectableontheSoundAdjustmenu.)
Thesettingisentered.
NOTE
When making adjustments to the volume settings, Real Tones
Disabled will be displayed and a momentary sound at the setting
level will be produced. To your save changes and close the menu
select .
5Tochangeothersettings,repeatsteps3and4.