Philips Expression MR400 - Edit User Settings

ExpressionMR400InstructionsforUseGettingStarted3‐15
ThefollowingMonitorSetupmenuitemsareavailable:
Tochangesettin gsintheMonitorSetupmenu
Edit User Settings
Allowsyoutocapture,storeandmanagemultipleusersetups,andtoselectanoperationalor
power‐updefaultsetup.Abackupandrestoreselectionalsoallowsyoutosavetheseuser
settingstoanexternaldevice.
ToopentheEditUserSettingsmenu
•Edit User Settings
• Parameters
• Sound Adjust
•Set Time & Date
• Sweep Speed
• Resp Speed
• Service(Bio-Med)
Step Action
1PresstheSetupkeyandthen
theMonitorkey.
TheMonitorSetupmenuappears.Currentsettingsaredisplayed.
2 Selectanyofthefollowingmenuitems:
EditUserSettings
Parameters
SoundAdjust
SetTime&Date
SweepSpeed
RespSpeed
Service(Bio‐Med)
Theselectedmenuappears.Currentsettingsaredisplayed.
3 Selectthedesiredmenuitem.
Thecurrentsettingishighlighted.
4 Selectthedesired
sub‐menuorsettingfromthemenuoptions.
Thesettingisentered.
5Tochangeothersettings,repeatsteps2,3and4.