Philips Expression MR400 - Trace Delay

ExpressionMR400InstructionsforUse TrendDataandPrinting13‐15
•P2outputstheTraceFwaveform.
•RESP(CO2)outputstheTraceDwaveform.
ToprintawaveformintheTrace2location
Trace Delay
Allowsyoutodelaythetimewhensendingthetracedatatotheprinter.
Thefollowingoptions(inseconds)areavailable:
•0S
•4S(Default)
•8S
•16S
Tosetaprintingtimedelay
Step Action
1PresstheSetupkeyandthenthePrinterkey.
ThePrintermenuappears.Currentsettingsare
displayed.
2 SelectTrace2.
TheTrace2menuappears.Thecurrentsettingisdisplayed.
3 Selectthedesiredsettingfromthemenuoptions:
Off
ECG1
ECG2
SPO2
P1
P2
RESP(CO2)
Thesettingisentered.
Step Action
1PresstheSetupkeyandthenthePrinterkey.
ThePrintermenuappears.Currentsettingsaredisplayed.
2 SelectTraceDelay.
TheTrace
Delaymenuappears.Thecurrentsettingisdisplayed.