Philips Expression MR400 - Adjusting the Alarm Limits; Alarm Limit Controls

ExpressionMR400InstructionsforUseAlarms4‐9
Adjusting the Alarm Limits
WARNING
Alarm limits can be set to a wide range of values, including off (with the exception of O2,
N2O and FiCO2). It is the responsibility of the operator of the MR400 to ensure that alarm
limit values appropriate for each patient are established and set. Failure to do so may cause
a lapse in patient monitoring.
TheMR400providesversatilemethodstocontrolthesettingsforthepatientparameteralarms.
Eachpatientparameter(withtheexceptionofbellowsrespiration)ha salowandhighalarmlimit
setting(seethetableonpage4‐22),whichcanbechang e dmanuallyorautomatic ally,unlessth e
parameterisof f.
Alarm Limit Controls
Individualalarmlimitsettingscanbeadjustedbytouchingtherespectiveparameterlabelinthe
AlarmsortheGasAlarmsmenu.
2 SelectLimitsDisplay.
TheLimitsDisplaymenuappears.Thecurrentsettingis
highlighted.
3 Selectthedesiredoptionfordisplayofthealarmlimitsettings:
Off
On
Thesettingisselected.
Step Action