Philips Expression MR400 - Connecting and Disconnecting the Sensor

ExpressionMR400InstructionsforUse MonitoringTemperature11‐3
Connecting and Disconnecting the Sensor
CAUTION CAUTION
When inserting or removing the temperature sensor from the MR400, only use the connector and
never pull or apply excessive force or tension to any other portion of the device.
Toconnectthetemperaturesenso r
Gras pthesensorconnectorthenaligntheconnectortothetemperatureportontheMR400and
pushtheconnectorforwarduntilyoufeelorhearit“click”intoplace.
Tostorethetemperaturesensor
Whennotinuse,looselyloopthesensorandthendrape
itoveranaccessoryhook.
TodisconnectthetemperaturesensorfromtheMR400
Gras pthesidesoftheconnector,andthenpulltheconnectoroutofthe
temperatureport.
1 Temperature port
2 Sensor connector
3 Accessory hook
2
1
3