Philips Expression MR400

To Next Page

To Previous Page

ExpressionMR400InstructionsforUse TrendDataandPrinting13‐7

Data Interval

Controlsthetimethatmustelapsebeforetrenddatareadingsaretaken.

Thefollowingoptionsareavailable:

•1Minute

•5Minutes(Default)

•10Minutes

•15Minutes

•20Minutes

•25Minutes

•30Minutes

•45Minutes

•60Minutes

• AutoNIBP(OccursattheIntervalselectedforautomaticNIBPmeasurements;seepage

12‐15fordetails)

3 Selectthe

desiredsetting:

30Seconds

1Minute

3Minutes

5Minutes

10Minutes

Thesettingischanged.

Note

If a newly selected period is shorter than the previous period (and

the arrows have been on for the longer of the two periods) then

immediate recalculation using the new period will occur. However, if

the newly selected period is longer than the previous period,

recalculation will occur using all available data.

Step Action

Philips Expression MR400 - Data Interval