Philips Expression MR400 - Changing the P1 (or P2) Alarm Limits

8‐20MonitoringInvasiveBloodPres sure ExpressionMR400InstructionsforUse
TochangetheP1(orP2)waveformamplitude
Changing the P1 (or P2) Alarm Limits
TheP1AlarmLimitsmenucanbeaccessedbytouchingthealarmlimitsettingsintheP1vitalsign
box,andtheP2AlarmLimitsmenucanbeaccessedbytouchingthealarmlimitsettingsintheP2
vitalsignbox.Exceptformenulabelingdifferences,theelementsdescri bedbeloware
applicable
toboththeP1andP2parameters.
Step Action
1 SelecttheP1(orP2)VSbox.
TheP1(orP2)menuappears.Currentsettingsaredisplayed.
2 SelectSize.
TheSizemenuappears.Thecurrentsettingishighlighted.
3 Selectthedesiredsize:
40mmHg
75mmHg
100mmHg
150mmHg(Default)
200mmHg
250mmHg
The
settingischanged.
1 Alarm limit settings, P1 VS box
2High button
3Low button
4 P1 Diastolic Alarm Limits menu label
5P1 Mean Alarm Limits menu label
6Enter button
7
1
2
35 46
8 9 10 11 12