Philips Expression MR400 - Trace A Lead

ExpressionMR400InstructionsforUseMonitoringECG5‐27
TochangesettingsintheECGmenu
Trace A Lead
SetstheECG A leadconfiguration(lead view).ForbestECGandheartratemonitoring,always
selecttheoptimalleadview,theonethatprovidestheleastartifactandlargestwaveform
detection.
Thefollowingoptionsareavailable:
•Off
•I
•II(Default)
•III
•AVL
•AVR
•AVF
TosettheECGAlead
Step Action
1 SelecttheECGVSbox.
TheECGmenu
appears.Currentsettingsaredisplayed.
2 SelectfromthefollowingECGmenuitems:
TraceALead
TraceBLead
Scale
GatingSource
HRSource
HRToneSource
FilterMode
ExtremeHR
PediatricECG
T‐WaveSuppression
Themenuitemappears.Thecurrentsettingishighlighted.
3 Selectthedesiredsettingfromthemenuoptions(exceptExtreme
HR,PediatricECG
andT‐WaveSuppression,whichareselectable
ontheECGmenu).
Thesettingisentered.
4Tochangeothersettings,repeatsteps2and3.