Philips Expression MR400 - Page 226

7‐10MonitoringCO2(LoFloOption) ExpressionMR400InstructionsforUse
Atthedefaultsetting,theCO2(RESP)AlarmLimitsmenucanbeaccessedbytouchingthealarm
limitsettingsintheRESPVSbox.
3 SelecttheLowbuttonortheHighbutton.
Theselectedbuttonwillbehighlightedandthecurrent
adjustment
willbedisplayed.
4Usingthekeypad,ortheincrement,decrement,orOffbuttons,
enterthedesiredsetting.
Thecurrentadjustmentwillreflectthesetting.
5PresstheEnterbuttontosavethesetting.
Thealarmlimitsettingisupdated.
6
Tochangetheremainingsettings,repeatsteps2–5.
Thecurrentadjustmentwill
reflectthechange.
1High button
2Low button
3 Alarm limit settings, CO2 (RESP), RESP VS box
4CO2 (RESP) Alarm Limits menu label
5Enter button
6 Current adjustment
7 Lower alarm limit setting
8 Alarm limit, minimum
9 Upper alarm limit setting
10 Alarm limit, maximum
Step Action
1
2
6
3
45
7 8 9 10