Philips Expression MR400 - Page 243

ExpressionMR400InstructionsforUse MonitoringInvasiveBloodPressure8‐11
B. PreparingSolution
Note
If an air-free solution source is not used (i.e., air is not extracted from the fluid source), air may
be forced into the monitoring line when solution is exhausted.
5Connectthereusablecable,REF989803194601(orequivalent),to
thetransducercable.
Step Action
1 Assemblepumpadministrationsetappropriatefortheinfusion
pumpthatistobeused.
2Ifusingheparin,addpriortoairremoval.
CAUTION
If an air-free solution source is not used (i.e., air is not extracted
from the fluid source), air may be forced into the monitoring line
when solution is exhausted.
3 Attachtubingtosolutioncontainer andpri methetubingfollowing
pumpmanufacturer’sinstructions.
Step Action
Transducer
Reusable cable
(REF 989803194601, or equivalent)
Transducer cable