Philips Expression MR400 - Page 285

ExpressionMR400InstructionsforUse MonitoringAgentsandGases(AGENTOption)9‐25
Atthedefaultsetting,theCO2(RESP)AlarmLimitsmenucanbeaccessedbytouchingthealarm
limitsettingsintheRESPVSbox.
4Usingthekeypad,ortheincrement,decrement,orOffbuttons,
enterthedesiredsetting.
Thecurrentadjustmentwillreflectthesetting.
5PresstheEnterbuttontosavethesetting.
Thealarmlimitsettingisupdated.
6
Tochangetheremainingsettings,repeatsteps2–5.
Thecurrentadjustmentwillreflectthechange.
1High button
2Low button
3 Alarm limit settings, CO2 (RESP), RESP VS box
4CO2 (RESP) Alarm Limits menu label
5Enter button
6 Current adjustment
7 Lower alarm limit setting
8 Alarm limit, minimum
9 Upper alarm limit setting
10 Alarm limit, maximum
Step Action
1
2
6
3
45
7 8 9 10