Ricoh M0A0 - Paper Transport; Paper Exit Sensor; Paper Overflow Sensor; Duplex Exit Sensor

4.Replacement and Adjustment
140
Paper Transport
 Turn off the main power switch and disconnect the power cord before you start any of the procedures in this
section.
Paper Exit Sensor
1. Open the rear cover.
2. Remove the paper exit sensor [A]. ( x1, Hook)
Paper Overflow Sensor
1. Remove the upper cover. (Upper Cover)
2. Remove the paper overflow sensor [A]. ( x1, Hook)
Duplex Exit Sensor
1. Remove the upper cover. (Upper Cover)