Ricoh M0A0 - Printer Service Mode; SP1-XXX (Service Mode)

3.Appendices: SP Mode Tables
163
Printer Service Mode
SP1-XXX (Service Mode)
1001
[Bit Switch]
001
Bit Switch 1 Settings
0
1
bit
0
DFU
-
-
bit
1
Responding with the hostname as the sysName
Model name (PnP name)
Hostname
This BitSwitch can change the value of the sysName.
0 (default): Model name (PnP name) such as "MP 402SPF"
1: Host name
bit
2
DFU
-
-
bit
3
No I/O Timeout
Disabled
Enabled
Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout setting will have no affect. I/O
Timeouts will never occur.
bit
4
SD Card Save Mode
Disabled
Enabled
If this bit switch is enabled, print jobs will be saved to the GW SD slot and not output to paper.
bit
5
[PS and PDF] Paper size error margin
±5pt
±10pt
When a PS job is printed by using a custom paper size, the job might not be printed because of a
paper size mismatch caused by a calculation error. By default, the error margin for matching to a
paper size is ±5 points. By enabling this BitSwitch, the error margin for matching to a paper size can
be extended to ±10 points.
bit
6
DFU
-
-
bit
7
[RPCS,PCL]: Printable area frame border
Disabled
Enabled
Prints all RPCS and PCL jobs with a border around the printable area.
1001
[Bit Switch]
002
Bit Switch 2 Settings
0
1
bit
0
DFU
-
-
bit
1
DFU
-
-
bit
2
DFU
-
-
bit
3
[PCL5e/c,PS]: PDL Auto Switching
Enabled
Disabled
Enables/Disables the MFPs ability to change the PDL processor mid-job.