Ricoh M0A0 - NFC Card Reader Type M27 (M502-10); Accessory Check; Installation Procedure

2.Installation
65
NFC Card Reader Type M27 (M502-10)
Accessory Check
No.
Description
Q'ty
1
NFC card reader
1
2
USB cable
1
3
Double-sided tape
1
4
Decal
1
-
EMC address
1
-
Caution chart
1
Installation Procedure
 When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If you
install without turning OFF the main power, an electric shock or a malfunction may occur.
1. Open the front cover.
2. Open the rear cover.
3. Remove the right cover [A].