Ricoh M0A0 User Manual

6.Troubleshooting
295
SC900 (Others)
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC900-00
D
Electronic counter error
The electronic total counter value is not the specified value.
This error is detected when the counter moves forward.
 The NVRAM connection is not correct.
 The NVRAM is defective.
 The NVRAM data is corrupted.
 The data was written in the wrong area due to external factors.
 When PRT received signals at SRM, the requested count is not completed.
Replace the NVRAM.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC990-
00
D
Software performance error
The software attempted to make an unexpected operation.
 Incorrect argument
 Incorrect internal parameter
 Insufficient working memory
 Abnormal performance caused by an error that cannot be detected in normal SC detection
due to hardware specifications.
 Turn the main power switch off and on.
 Reinstall the software of the controller board.
 Reinstall the software of the engine board.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC991-
00
C
Software Error (Operation Can Continue)
The software performed in an unexpected way. By taking recovery measures, further operation
is possible.
 The parameter is invalid.
 There is insufficient work memory.
 This SC is caused by errors that are not normally detected from the hardware.
Not required
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC992-00
D
Undefined SC
An undefined SC has occurred.
There is a bug in the software.

Ricoh M0A0 Specifications

General

Brand	Ricoh
Model	M0A0
Category	All in One Printer
Language	English