Ricoh M0A0 User Manual

2.Installation
78
SD Card Appli Move
Overview
There are only two SD card slots (one of them is a service slot).
However, if multiple SD card applications are merged, three or more SD card applications can be used simultaneously.
The SD card merge function enables the use of three or more functions within the capacity of two SD cards by physically
transferring the function of one SD card to other SD cards (all SD card options can be stored in two SD cards).
However, because SD card applications are licensed, an SD card license will be transferred to the target SD card after
merging. The original SD card cannot be used even if it is inserted into the machine.
A process to prevent illegal copying is also performed.
The service program "SD Card Appli Move" (SP5-873) allows you to move application programs from one SD card to
another SD card.
Notes on Using the SD Merge Function
 The data necessary for authentication is transferred with the application program from an SD card to another SD
card. Authentication fails if you try to use the SD card after you moved the application program from one card to
another card.
 Do not use an SD card that has been used before for other purposes. Normal operation is not guaranteed when
such an SD card is used.
 An SD card, which becomes empty after the data in it has been moved to another card, cannot be reused.
 Keep the empty source card (card which has had its data moved to another card) by, for example, affixing it near
the SD card slot using adhesive tape. This is for the following reasons:
 The SD card can be the only proof that the user is licensed to use the application program.
 You may need to check the SD card and its data to solve a problem in the future.
 Do not move OCR Unit to another SD card.
SD Card Applications
SD Card Option
Card Size
Capacity
Movable to
another SD card
Target SD
card
Remarks
Data Overwrite Security
Unit Type M19
512Mb
Yes
Yes
Available for use in Slot 1
(Upper) and Slot 2 (Lower)
XPS Direct Print Option
Type M27
512Mb
Yes
Yes
OCR Unit Type M13
512Mb
No
No
 Both Slots 1 and 2 are vacant when the machine is shipped from the factory.
 OCR Unit Type M13 cannot be moved to another SD card and is unavailable for target SD card.

Ricoh M0A0 Specifications

General

Brand	Ricoh
Model	M0A0
Category	All in One Printer
Language	English