5.System Maintenance
228
The machine will automatically reboot itself.
The figures at the lower right of the display indicate “Number of updated items/ All items to be
updated”.
Update via SD card
Update with an SD card, which is the conventional method, is available if you write the package firmware to the SD card.
If an error code is displayed, refer to Error Screens During Updating.
1. Create a new folder in the SD card, and then name it “package”.
2. Copy the package firmware (xxxxxxxx.pkg) to this folder.
If you copy the package firmware into the conventional “romdata” folder, the update will not work.
Only one version of the package firmware should be copied into the folder. If you copy multiple
To Next Page
Loading...
Need help?
General
