Ricoh M0A0 User Manual

3.System Maintenance
35
3. System Maintenance
System Maintenance
Maintenance Modes
Service program (SP) modes for the Smart Operation Panel are as follows:
Mode
Use
Notes
SP Mode (MFP)
SP modes for the MFP (controller,
engine)
The numeric keys are required to enter this mode.
Display the soft keys of the GW application or of the SP
mode.
Service mode
(control panel)
SP modes for the Smart Operation
Panel.
 Changing SP mode settings in
the Screen Features menu.
 Installing and updating
applications that can be
installed
Same as above
Recovery mode
Maintenance modes for the Android
OS
 Updating firmware
 Initializing all data
-
Login to/Logout from Control Panel Service Mode
Login
In the same way as you log in to the SP Mode on the MFP, you use the soft keys to enter a combination of numbers in
order to login to the service mode of the control panel.
 You cannot log in to the service mode of the control panel when one of the following screens is displayed.
 Stop All Jobs
 User Tools
 Address Book Management
Use the numeric keys on one of the following screens.
 Soft keys on the GW application screen
 Soft keys for the control panel’s service mode (displayed by pressing both the [EX3] key and [Check Status] at the
same time)

Ricoh M0A0 Specifications

General

Brand	Ricoh
Model	M0A0
Category	All in One Printer
Language	English