2.Installation
41
down.
Installation Procedure
Before installing this option, turn OFF the main power and unplug the power cord from the wall socket.
Otherwise an electric shock or a malfunction may occur.
The USB Device Server Option has an IP address stored on the PCB. This is different from the machine's IP
address. The IP address and other network settings of the USB Device Server Option must be configured after
installing this option.
There are four tabs on the back of the right cover.
1. Turn OFF the main power of the machine.
2. Unplug the power cord from the wall socket.
3. Open the front cover.
4. Open the rear cover.
To Next Page
Loading...
