Ricoh M0A0 User Manual

5.System Maintenance
194
Firmware type
Firmware location
Websupport
Controller Board
WebUapl
Smart Operation Panel – CPU board
CSPF
Smart Operation Panel – CPU board
What is Included in the Firmware Package
Modules included in the firmware package are indicated by ticks ( ).
Firmware not included in the package require updating by SD cards, etc.
Included
Firmware
-
aics
animation
Application Site
BluetoothService
CheetahSystem
-
CSPF
-
Data Erase Onb
-
EcoInfoWidget
Engine
-
External Auth
Fax
-
FaxInfoWidget
GWFCU3.8-9(WW)
Procedure
 A SD card is a precision device, so when you handle an SD card, respect the following.
 When the power is turned ON, do not insert or remove a card.
 During installation, do not turn OFF the main power.
 Since the card is manufactured to high precision, do not store it in a hot or humid location, or in direct
sunlight.
 Do not bend the card, scratch it, or give it a strong shock.
 Before downloading firmware on an SD card, check whether write-protection of the SD card is canceled. If
write-protection is enabled, an error code (error code 44, etc.) will be displayed during download, and the
download will fail.
 Before updating firmware, remove the network cable from this machine.
 If SC818 is generated during software update, turn the main power OFF then ON, and complete the update
which was interrupted.
 During software update, network cables, remove interface cables, wireless boards, etc., (so that they are not

Ricoh M0A0 Specifications

General

Brand	Ricoh
Model	M0A0
Category	All in One Printer
Language	English