5.System Maintenance
195
accessed during the update).
Update procedure
1. First download the new firmware to the SD card.
2. Turn OFF the main power.
3. Remove the SD card slot cover [A].
4. Insert the SD card straight into slot 2 [A].
ï‚· Check whether the card is properly in the SD card slot. When a SD card is inserted, a click is heard, and
it is locked.
ï‚· To remove the card, release by pressing once.
5. Turn ON the main power.
6. Wait until the update screen starts (about 45 seconds).
To Next Page
Loading...
Need help?
General
