Ricoh M0A0 - 3 Appendices: SP Mode Tables; Service Program Mode; Service Table Key

3.Appendices: SP Mode Tables
17
3. Appendices: SP Mode Tables
Service Program Mode
Service Table Key
Notation
What it means
[range /
default / step]
Example: [-9 to +9 / 0 / 0.1 mm step]. The setting can be adjusted in the range ±9, value reset to
+3.0 after an NVRAM reset, and the value can be changed in 0.1 mm steps with each key press.
*
Value stored in NVRAM. After a RAM reset, this default value (factory setting) is restored.
DFU
Denotes "Design or Factory Use". Do not change this value.
Japan only
The feature or item is for Japan only. Do not change this value.
SSP
This denotes a "Special Service Program" mode.
FSP
This denotes a "Factory Service Program" mode.