2.Installation
79
Move Exec
"Move Exec" (SP5-873-001) lets you move application programs from the original SD card to another SD card.
Do not turn ON the write protect switch of the system SD card or application SD card on the machine. If the
write protect switch is ON, a download error (e.g. Error Code 44) will occur during a firmware upgrade or
application merge.
1. Turn the main power OFF.
2. Remove the SD card slot cover [A].
3. Make sure that a target SD card is in SD Card Slot 1 [A]. The application program is moved to this SD card.
4. Insert the source SD card with the application program into SD Card Slot 2 [B].
The application program is copied from this source SD card.
5. Turn the main power ON.
To Next Page
Loading...
