2.Appendices: Preventive Maintenance Tables
13
2. Appendices: Preventive Maintenance Tables
Preventive Maintenance Tables
Maintenance Tables
Chart: A4 (LT)/6%
Mode: 3 prints/job
Environment: Normal temperature and humidity
Yield may change depending on circumstances and print conditions.
Symbol keys: C: Clean, R: Replace
Mainframe
ï‚· Yield Parts:
The parts mentioned in these tables have a target yield. However, the total copy/print volume made by the
machine will not reach the target yield within the machine's targeted lifetime if the machine is used under the target
usage conditions (ACV, color ratio, and P/J). So, these parts are categorized not as PM parts but as yield parts
(EM parts). The parts with "(R)" in this table are yield parts.
Paper Feed
Wipe with a damp cloth when cleaning
Wipe with a damp cloth when cleaning
ï‚· Replace when a feeding failure occurs
ï‚· Wipe with a damp cloth when cleaning
ï‚· Replace when a double feed occurs
ï‚· Wipe with a dry cloth when cleaning
Paper Feed Roller (Bypass)
ï‚· Replace when a feeding failure occurs
ï‚· Wipe with a damp cloth when cleaning
ï‚· Replace when a double feed occurs
ï‚· Wipe with a dry cloth when cleaning
PCDU