5.System Maintenance
227
4. Press [Execute Update].
5. Check the version of the received package firmware, and then Press [YES].
Update is started.
If the version of the reserved package in the HDD is older than the latest version, the messages shown in
the following picture are displayed.
If you wish to download the latest version, Press [Execute] beside the message “Download and update
the latest package.” Then update of the package firmware will be started.
If you wish to update using the firmware in the HDD (old version), Press [Execute] beside the message
“Update to the received package.”
6. [Update done] message is displayed.
To Next Page
Loading...
