5.System Maintenance
229
versions of package firmware to the SD card, the machine will select only one version of the firmware
randomly.
3. Turn OFF the main power.
4. Insert the SD card which contains the package into SD card slot 2 (for service).
5. Turn ON the main power
6. Press [Update].
ï‚· When the SD card contains both a firmware package and one or more modules, the following display
may show up. Select [Package] and Press [OK] to move to step 4 above.
7. Update is started automatically after the package firmware download to the HDD has been completed.
To Next Page
Loading...
Need help?
General
