Ricoh M0A0 User Manual

6.Troubleshooting
281
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
2. It takes a long time after main power on for the operation panel to become ready.
HDD access may be consuming time. Normal HDD access time after main power on is
about 5 seconds. If the machine is not waiting for the engine to be ready and it still takes 20
to 30 seconds or more, the HDD may be the cause. If there is a problem with the HDD,
HDD-related SCs such as SC860 and SC863 will occur frequently. Print the SC log data
and check them.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC863-
22
D
HDD data read failure
The data written to the HDD cannot be read normally.
Bad sectors were generated during operation.
(An error occurred in partition "u".)
Guide for when to replace the HDD
1. When SC863 has occurred ten times or more
 The interval is short.
 Repeatedly occurs in the same situation (At power-on, etc.).
 Startup takes a long time when the main power is turned on.
2. It takes a long time after main power on for the operation panel to become ready.
HDD access may be consuming time. Normal HDD access time after main power on is
about 5 seconds. If the machine is not waiting for the engine to be ready and it still takes 20
to 30 seconds or more, the HDD may be the cause. If there is a problem with the HDD,
HDD-related SCs such as SC860 and SC863 will occur frequently. Print the SC log data
and check them.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC863-
23
D
HDD data read failure
The data written to the HDD cannot be read normally.
Bad sectors were generated during operation.
(An error occurred in partition "v".)
Guide for when to replace the HDD
1. When SC863 has occurred ten times or more
 The interval is short.
 Repeatedly occurs in the same situation (At power-on, etc.).
 Startup takes a long time when the main power is turned on.
2. It takes a long time after main power on for the operation panel to become ready.
HDD access may be consuming time. Normal HDD access time after main power on is
about 5 seconds. If the machine is not waiting for the engine to be ready and it still takes 20

Ricoh M0A0 Specifications

General

Brand	Ricoh
Model	M0A0
Category	All in One Printer
Language	English