3.Appendices: SP Mode Tables
131
stored on the document server, on a telephone line.
Note: Color fax sending is not available at this time.
[0 to 99999999/ 0 / 1/step]
These SPs count the total number of jobs (color or black-and-white) sent by fax directly on a telephone line.
Note: Color fax sending is not available at this time.
ï‚· These counters count jobs, not pages.
ï‚· This SP counts fax jobs sent over a telephone line with a fax application, including documents stored on the
document server.
ï‚· If the mode is changed during the job, the job will count with the mode set when the job started.
ï‚· If the same document is faxed to both a public fax line and an I-Fax at a destination where both are available,
then this counter increments, and the I-Fax counter (8 12x) also increments.
ï‚· The fax job is counted when the job is scanned for sending, not when the job is sent.
[0 to 99999999/ 0 / 1/step]
These SPs count the total number of jobs (color or black-and-white) sent, either directly or using a file stored
on the document server, as fax images using I-Fax.
Note: Color fax sending is not available at this time.
[0 to 99999999/ 0 / 1/step]
These SPs count the number of jobs (color or black-and-white) sent (not stored on the document server), as
fax images using I-Fax.
Note: Color fax sending is not available at this time.
ï‚· These counters count jobs, not pages.
ï‚· The counters for color are provided for future use; the color fax feature is not available at this time.
ï‚· The fax job is counted when the job is scanned for sending, not when the job is sent.
[0 to 99999999/ 0 / 1/step]
These SPs count the total number of jobs (color or black-and-white) scanned and attached to an e-mail,
regardless of whether the document server was used or not.
[0 to 99999999/ 0 / 1/step]
These SPs count the number of jobs (color or black-and-white) scanned and attached to e-mail, without
storing the original on the document server.
ï‚· These counters count jobs, not pages.
ï‚· If the job is stored on the document server, after the job is stored it is determined to be color or black-and-white