3.Appendices: SP Mode Tables
152
[0 to 99999999/ 0 / 1/step]
These SPs count by color mode the total number of pages sent to a Scan Router server by the Scan
application.
The B/W and Color counts are done after the document is stored on the HDD of the Scan Router server.
If the job is canceled before storage on the Scan Router server finishes, the counts are not done.
The count is executed even if regardless of confirmation of the arrival at the Scan Router server.
[0 to 99999999/ 0 / 1/step]
These SPs count by color mode the total number of pages sent to a folder on a PC (Scan-to-PC) with the
Scan and LS applications.
[0 to 99999999/ 0 / 1/step]
These SPs count by color mode the total number of pages sent with Scan-to-PC with the Scan application.
These SPs count the number of pages sent by PC Fax. These SPs are provided for the
Fax application only, so the counts for SP8 681 and SP8 683 are the same.
[0 to 99999999/ 0 / 1/step]
This counts pages sent from a PC using a PC fax application, from the PC through the copier to the destination.
When sending the same message to more than one place using broadcasting, the pages are only counted once.
(For example, a 10-page fax is sent to location A and location B. The counter goes up by 10, not 20.)
These SPs count the number of pages sent from the document server. The counter for the
application that was used to store the pages is incremented.
[0 to 99999999/ 0 / 1/step]
The L: counter counts the number of pages stored from within the document server mode
screen at the operation panel. Pages stored with the Store File button from within the
Copy mode screen go to the C: counter.