4.Appendices: Software Configuration
185
Account used to access the folder
Either enabled or
disabled
(as configured in the Address Book's Folder Authentication
setting)
0 (default): The authenticated user's account
1: The recipient's account
(as configured in the Address Book's Folder Authentication
setting)
* The "user's account" will be either the one entered during scanning (see the Manual Entry screen capture) or if User
Auth. is enabled, the account configured in the user's Folder Authentication setting will be used.
The destination's access logs:
Case A or Case C with SP=0: The access logs can be used to determine which user sent the scan.
Case B or Case C with SP=1: All access will be logged as the same user.