3.System Maintenance
39
ï‚· Interface Settings
ï‚· Wi-Fi settings (ON/OFF)
Displays the open source license information.
Displays the versions of control panel firmware and
installed applications.
When saving the software version list on an SD
card, insert an SD card into the SD card slot of the
control panel, and then press [Save to SD Card].
Input a port number for communication with the
import/export and RFU server. The input number is
used for both HTTP and HTTPS connections.
(Normally, input a number within 55101-55111.)
Displays a list of installed applications.
If you press [Settings] for an application, the setting
screen for the CE is displayed. The screen does not
change if the application has no setting items.
Authentication
priority mode
Authentication
priority mode
This setting gives priority to the recovery time from
energy saving modes when an IC card
authentication device is connected.
When this setting is selected, the MFP does not
enter Engine OFF mode, and always recovers from
Silent mode.
You can specify the start time of Authentication
priority mode.
Note: This can be changed only when
[Authentication priority mode] is deselected.
You can specify the period of validity of
Authentication priority mode.
Note: This can be changed only when
[Authentication priority mode] is deselected.
Screen device
always-connection
Setting
This setting prevents the control panel from entering
Sleep mode, so that Bluetooth and other
communication devices remain connected.
When this setting is selected, the control panel does