To Next Page

To Previous Page

3.System Maintenance

LED Check

Select the [All Light On] check box, and make sure the following LEDs light:

 Data In indicator (facsimile and printer modes)

 Fax indicator

 [Check Status] indicator (flashes in red and orange alternately)

When the check is completed, press [Back] to return to the top menu of [Self Check].

Key Check

Check if the Extended Feature keys on the left side of the control panel (EX1, EX2, EX3 from top to bottom) are

functioning normally. If they are functioning normally, the key will turn green when pressed.

[FOOT SW] is not used.

When the check is completed, press [End] to return to the top menu of [Self Check].

LCD Check

Visually inspect the color of the LCD. The displayed colors are white/black/red/green/blue. The LCD changes to the

next color when you press it.

Ricoh M0A0 User Manual

Questions and Answers: