Ricoh M0A0 - Page 684

4.Service Tables
58
1: Disabled
2*
3rd paper feed station
usage for fax printing
0: Enabled
1: Disabled
3*
4th paper feed station
usage for fax printing
0: Enabled
1: Disabled
4*
LCT usage for fax
printing
0: Enabled
1: Disabled
5-
7
Not used
Do not change the settings.
* This setting can be used for the client machine which has no FCU.
Printer Switch 03 (SP No. 1-103-004)
No
Function
Comments
0*
Length reduction of received data
0: Disabled
1: Enabled
0: Incoming pages are printed without length reduction.
(Page separation threshold: Printer Switch 03, bits 4 to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04, bits 0 to 4)
1-
3
Not used
Do not change the settings
4
to
7
Page separation setting when sub scan
compression is forbidden
00-0F (0-15 mm: Hex)
Default: 6 mm
Page separation threshold (with reduction disabled with switch
03-0 above).
For example, if this setting is set to "10", and A4 is the selected
paper size:
If the received document is 10 mm or less longer than A4, then
the 10 mm are cut and only 1 page prints.
If the received document is 10 mm longer than A4, then the
document is split into 2 pages.
* This setting can be used for the client machine which has no FCU.
Printer Switch 04 (SP No. 1-103-005)
No
Function
Comments
0
to
4
Maximum reducible length when length reduction is enabled with switch 03-0 above.
[Maximum reducible length] = [Paper length] + (N x 5mm)
"N" is the decimal value of the binary setting of bits 0 to 4.