4.Service Tables
60
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0E (SP No. 1-103-015)
Paper size selection priority
0: A paper size that has the same width as the received data is selected
first.
1: A paper size which has enough length to print all the received lines
without reduction is selected first.
Paper size selected for printing
A4 width fax data
0: 8.5" x 11" size
1: A4 size
This switch determines which paper size is selected for printing A4 width
fax data, when the machine has both A4 and 8.5" x 11" size paper.
1: If all paper sizes in the machine require page separation to print a
received fax message, the machine does not print the message (Substitute
Reception is used).
After a larger size of paper is set in a cassette, the machine automatically
prints the fax message.
Printing the sample image on
reports
"Same size" means the sample image is printed at 100%, even if page
separation occurs.
User Parameter Switch 19 (13H) bit 4 must be set to "0" to enable this
switch.
Refer to “Detailed Descriptions (Link)” for more details.
50% reduction (sub-
scan only)
Do not change the settings.
Equalizing the reduction ratio
among separated pages
(Page Separation)
0: Enabled
1: Disabled
0: When page separation has taken place, all the pages are reduced
with the same reduction ratio.
1: Only the last page is reduced to fit the selected paper size when page
separation has taken place. Other pages are printed without reduction.
* This setting can be used for the client machine which has no FCU.
To Next Page
Loading...
Need help?
General
