2.Installation
81
3. Insert the integrated SD card into Slot 1 [A].
4. Insert the SD card which became empty after merging into Slot 2 [B].
5. Turn the main power ON.
6. Enter the SP mode.
7. Select SP5-873-002 "Undo Exec."
8. Follow the messages shown on the operation panel.
9. Turn the main power OFF.
10. Remove the SD card from SD Card Slot 2 [B].
11. Attach the SD card slot cover.
12. Turn the main power ON.
13. Check that the application has been deleted.
To Next Page
Loading...
